Having concrete floors at poolside, kitchen, garage, living area, outdoor patio and workshop is surely a common site. If you have concrete floors or are planning to install one in your premises, you need take measures for the floors to remain in the best condition. Sealers are something that comes to rescue in this regard. Designed to perfection, sealers are a good choice for substances like concrete because concrete is porous in nature, hence moisture and humidity could have bad effects on it.
What exactly are concrete sealers and how do they work?
Just as the name suggests, concrete sealing act as a protective measure, and seals the pores of the concrete so that moisture, dirt, dust and water does not seep in. In addition to that, it even prevents build-up of molds and mild dews that may lead to cracks, crumbles and discoloration of the concrete floors. Therefore, these sealers protect the floors in not just one, but many ways, such as
Protection against water, dust and moisture
Prevents formation of musty odor or foul smell
Prevents penetration of pressure which can cause cracks.
Although there are various advantages associated with the usage of sealers, yet maintenance of floor after this process is equally important. If you are not meticulous with it, then there are 5 major problems that you may face. Hence, to help out here we are going to discuss a few tips that you can use to tackle concrete sealer problems.
#1 Presence of bubbles on the sealer
If you find many bubbles present on the sealer then this could result from over application. It is important to note that when you are applying a coat of sealer to maintain it, you need to apply a thin coat because too much of sealer can lead to airy displacement, which means that air could trap beneath the coat. Hence, thin film of concrete sealing is highly recommended by professionals in order to avoid bubbles on the sealer.
#2 Sealers flaking and turned white
It’s often seen that solvent based sealers tend to flake out and turn white. This happens because of two reasons, one is applying the sealer when the concrete surface is wet, and the other is to wet mixture concrete that holds bleed water. Now, if the sealer is applied on such surfaces then it does not bond well with the concrete and starts to float. However, when thick coat is applied then the moisture present on the concrete gets trapped and sticks to it for many years.
#3 Sealers turned powdery white
Sealers mainly dry with the help of evaporation. Therefore, their drying process is affected by the humidity and also the temperature. So, when the temperature is too high and the humidity is too low then the solvent of the sealer will become dry before the water which makes it white and powdery because of the latex particles that do not mix before drying.
#4 Stained sealers from tiers, fertilizers and oils
Most of the sealer substances are not resistive to stains or chemicals. So in order to enhance the durability of the concrete sealing a coat of urethane or epoxy can be added to ensure that the sealer holds perfect resistive capacity against stains from fertilizers, oils and tiers.
#5 Concrete turned dark and blotchy after applying sealers
Now, concrete sealers that have film-forming ability tend to leave a glossy finish on the concrete floor. It gives the concrete a wet look that turns it dark and blotchy as well. In order to avoid this color, the texture and design of the concrete should always be considered before selecting appropriate sealers. Other than that, finishing process should be carried out efficiently to make sure that the concrete gets back its true color with time.
Do you want to know more about Concrete Sealing? Visit this link to get more additional information.